 |
|
 |
 |
 |
 |
Over The Ditch Line Coatings |
|
|
Girth Weld Coatings |
|
|
Liquid Adhesive Systems |
|
|
Coatings For Pipe Fittings, Bends & Ts |
|
|
Accesory Products |
|
|
Plant Applied Line Coatings |
|
|
Reconditioning / Rehabilitation Coating System |
Click here to watch application video
|
|
Over The Ditch Line Coatings and
Liquid Adhesive Systems |
1019 |
1019 - Solvent based liquid adhesive for line
travel system
Common Applications
Solvent based primer designed for machine, spray, or hand brush
applications to mechanically cleaned pipe surfaces. |
|
Maximum Temperature: 100 ºC - 212ºF
Data Sheet - 1019 1027 1030 |
|
1600 |
1600 -
High temperature polypropylene system - GO Coat 250
Common Applications
Designed for the corrosion protection of new and existing
pipeline with a maximum operating temperature of 250°F (121°C). |
|
Maximum Temperature:
121 ºC - 250ºF
Data Sheet - 1600 |
|
|
1027
|
1027 - Liquid and Spray Adhesive
Common Applications
Solvent based primer designed for machine, spray, or hand brush
applications to mechanically cleaned pipe surfaces. |
|
Maximum Temperature:
100 ºC - 212ºF
Data Sheet - 1019 1027 |
|
2000 |
1030 - Liquid and Spray Adhesive
Common Applications
Solvent based primer designed for machine, spray, or hand brush
applications to mechanically cleaned pipe surfaces. |
| Maximum Temperature: 100 ºC - 212ºF
Data Sheet - 1019 1027 1030 |
|
|
1619
|
1619 - Solvent-based liquid adhesive
Common Applications
Thermally activated solvent based primer designed for machine,
spray, or hand brush applications to mechanically cleaned new or
reconditioned pipe. |
|
Maximum Temperature:
120 ºC - 248ºF
Data Sheet - 1619 2019 1627 2027 |
|
2000 |
2000 - High shear system - GO Coat 200
Common Applications
Designed for in field application on pipe where soil stress
conditions exist and with a maximum operating temperature of
200° F (93° C). |
| Maximum Temperature: 93 ºC - 199ºF
Data Sheet - 2000 |
|
|
2019 |
2019 - Solvent-based liquid adhesive
Common Applications
High shear primer designed for machine, spray, or hand brush
applications to mechanically cleaned pipe surfaces. |
|
Maximum Temperature:
100 ºC - 212ºF
|
|
2027
|
2027 - Solvent-based liquid adhesive
Common Applications
High shear primer designed for hand brush applications to
mechanically cleaned pipe surfaces. |
| Maximum Temperature:
100 ºC - 212ºF
|
|
|
2055 |
2055 - High shear system - GO Coat 200
Common Applications
Designed for in field application on pipe where soil stress
conditions exist and with a maximum operating temperature of
200° F (93° C). |
|
Maximum Temperature:
93
ºC - 199ºF
Data Sheet - 2055 |
|
955
|
955 - Mechanical protection layer for travel
system
|
Description |
| Mechanical protection layer for travel system |
|
Maximum Temperature:
85 ºC - 185ºF
Data Sheet - 980 955 |
|
|
980
|
980 - Anti corrosion layer for line travel system
|
Description |
| Anti corrosion layer for line
travel system |
|
Maximum Temperature: 66
ºC - 151ºF |
|
|
P 1033A |
P 1033A - Low VOC liquid adhesive system
|
Polyken liquid adhesive systems consist
of elastomers blended with polymeric resisns dissolved in an
organic solvent system. They can be used for machine or hand
applications, are non-toxic, non-polluting and conform to
local and national standards. In addition to excellent
adhesion to the pipe substrate and cathodic disbondment
resistance, the pipe surface is protected against stress
corrosion cracking with industry proven SCC inhibitors.
The newly reformulated Polyken 1033a is a low VOC liquid
adhesive system that complies with federal and state clean
air requirements. The VOC content is 1.03lbs/gal
(0.859g/ltr). The newly reformulated 1033a is designed for
machine or hand application in environmentally sensitive
areas. The 1033a is not only environmentally clean, but also
highly effective in protecting against corrosion. It is easy
to apply and fast drying. Used in conjunction with the
recommended Polyken coating systems, the #1033a will provide
the same longterm performance as the other Polyken liquid
adhesive systems. |
|
|
Maximum Temperature:
100
ºC - 212ºF
Data Sheet - 1033A 1039 |
|
P 1039
|
P 1039 - Zero VOC liquid adhesive system
The liquid adhesive systems consist of
elastomers blended with polymeric resisns dissolved in an
organic solvent system. They can be used for machine or hand
applications, are non -toxic, non-polluting and conform to
local and national standards. In addition to excellent
adhesion to the pipe substrate and cathodic disbondment
resistance, the
pipe surface is protected against stress corrosion cracking
with industry proven SCC inhibitors.
Polyken 1039
This is a zero VOC liquid adhesive system that complies with
federal and state clean air requirements. The liquid
adhesive is designed for machine or hand application in
environmentally sensitive areas. Used in conjunction with
the recommended Polyken coating systems, the #1039 will
provide the same long-term performance as the other Polyken
liquid adhesive systems.
Warning: Polyken liquid adhesive systems are FLAMABLE
MIXTURES. Caution: Store away from heat source. |
|
| Maximum Temperature: 100 ºC - 212ºF
Data Sheet - 1033A 1039 |
|
|
|
Girth Weld Coatings and Coatings For Pipe Fittings, Bends
|
|
930 Wrap
|
930 Wrap - Cold applied tape coating system
Common Applications
· Heavy duty joint wrap tape for hand wrapping in applications
where higher shear properties are required. · Designed without
release liner for less waste and ease of use. |
| Maximum Temperature:
66 ºC - 151ºF
Data Sheet - 930 |
|
932 Wrap |
932 Wrap - Cold applied tape coating
Common Applications
• Cold applied tape system with an elevated high-tack adhesive.
• Provides excellent conformability when hand applied to field
joints, fittings, and specialty piping. |
| Maximum Temperature: 50 ºC - 122ºF
Data Sheet - 932 |
|
|
DIN 942/955
|
DIN 942/955 - Cold applied double faced tape
Common Applications
The Polyken double faced tape coating system is designed for the
corrosion protection of girth weld field joints, fittings,
fabricated pipe sections, and the repair of main line coatings. |
| Maximum Temperature: 65 ºC - 149ºF
Data Sheet - 942 955 |
|
670
|
670 - Pier Piling Corrosion Protection Tape
Common Applications
POLYKEN 670 has been specifically designed and ideally suited
for the corrosion protection of "in-situ" pilings installed in
fresh or sea water. |
| Maximum Temperature:
30 ºC - 86ºF
Data Sheet - 670 |
|
|
671
|
671 -
Pier Piling Mechanical Protection Wrap
Common Applications
POLYKEN 671 Pier Piling Mechanical Protection Wrap is a tough,
abrasion resistant protection layer to be applied over 670
innerwrap. POLYKEN 671 Outerwrap can be easily applied in-situ,
both above and below the water line. |
| Maximum Temperature:
30 ºC - 86ºF
Data Sheet - 671 |
|
930 Wrap
|
930 Wrap - Cold applied tape coating system
Common Applications
· Heavy duty joint wrap tape for hand wrapping in applications
where higher shear properties are required. · Designed without
release liner for less waste and ease of use. |
| Maximum Temperature: 66 ºC - 151ºF
Data Sheet - 930 |
|
|
932 Wrap |
932 Wrap - Cold applied tape coating
Common Applications
• Cold applied tape system with an elevated high-tack adhesive.
• Provides excellent conformability when hand applied to field
joints, fittings, and specialty piping. |
| Maximum Temperature:
50 ºC - 122ºF
Data Sheet - 932 |
|
934 Wrap
|
934 Wrap - Cold applied tape coating system
Common Applications
• Cold applied tape system with an elevated high-tack adhesive.
• Used as a patch/repair system and as the primary corrosion
protection system field joints, fittings, and specialty piping. |
| Maximum Temperature:
66 ºC - 151ºF
Data Sheet - 934 |
|
|
936 Wrap
|
936 Wrap - High U.V. resistant/high tack joint
wrap tape
|
Description |
| Polyken 936 is a long-term UV resistant high
tack joint wrap for above or below ground use. This unique
product is easily applied to field joints, fittings, tees and
ells. The polyolefinic backing has excellent conformability, and
built-in resistance to environmental stress cracking (ESCR). |
| Maximum Temperature: 66 ºC - 151ºF
Data Sheet – 936 Wrap
|
|
937/938 Mastic |
937/938 Mastic System
|
Description |
| The Polyken family of mastics are cold
applied coatings designed to protect underground piping such as
valves, T’s, ells and couplings. Once applied, the Polyken
mastics form a tough monolithic coating, which resists cracking,
crazing, or checking.
Mastic System |
|
|
|
Accesory Products and Reconditioning / Rehabilitation Coating System |
|
900
|
900 -
General utility tape for hand application on small diameter pipe
joints and fittings
Common Applications
General utility tape for hand application on small diameter
pipe, joints, and fittings. |
| Maximum Temperature:
66 ºC - 151ºF
|
Data Sheet - 900, 910, 911, 920 |
931/939 Filler Tape
|
931/939 Filler Tape - Self-adhering filler Tape
Common Applications
• Self-adhering.
• Used to fill voids and crevices around joints, fittings, and
specialty piping. |
| Maximum Temperature:
121 ºC - 250ºF
|
Data Sheet - 931 / 939 Filler Tape |
|
Rockshield System
|
Rockshield System - Tough PE mesh padding for
coating protection
Common Applications
Backfill Protection |
| Maximum Temperature:
65
ºC - 149ºF |
Data Sheet - Rockshield System |
|
Reconditioning/Rehab - Over the Ditch
Common Applications
Offers consistent performance and quality, ease of application
and cost-effective solution. Can be applied on-site at ambient
temperatures. |
| Maximum Temperature:
65 ºC - 149ºF
|
Data Sheet - 980 955 |
|
|
Plant Applied Line Coatings |
|
905
|
905 -
Cold applied tape system used for tie-in sections during pipeline
construction
Common Applications
It is designed for machine and hand applied applications and
delivers excellent conformability when applied over seamed,
spiral welded or extruded pipe. Because of the high corrosion
protection inherent in the combination of Polyethylene film and
Butyl rubber adhesive, Polyken products have proven in-ground
success against both chemical and electrolytic corrosion. It is
specifically designed to be used in special sections and
pipeline tie-in areas. |
| Maximum Temperature:
65 ºC - 149ºF |
Data Sheet - 905 |
Synergy |
Synergy - Multi layer plant coating system
Hot, plant applied coating system.
|
Highlights |
• Thermally fused poylmeric system.
• Impermeable to oxygen and moisture.
• High shear resistance.
• Incorporated SCC inhibitors.
• Low cathodic protection costs.
• Durable and reliable.
• Flexible system design. |
|
| Maximum Temperature: 85 ºC - 185ºF
|
Data Sheet - DCSynergy |
|
YGIII
|
YGIII - Multi layer plant Coating System
Common Applications
• Large Diameter Water Pipe
• Water Mains
|
Highlights
|
• Proven long-term
performance.
• Impermeable to oxygen and moisture.
• Resistant to soil stress.
• Zero VOC coating system available.
• Cross-linked butyl alloy adhesive.
• Uniform coating thickness.
• Low cathodic protection costs.
• Exceeds AWWA standards.
• Manufactured at ISO 9002 facility. |
|
| Maximum Temperature:
85
ºC - 185ºF |
Data Sheet - YGIII |
|
|
|
|
| |
|
www.samm.com.tr © 2005 •
Privacy Policy • Terms Of Use • WebMaster |
|